Impose pressure on sensor to the normal input for serveral times, observe the output of one certain input, the percentage of the maximun discrepency in this certain input to normal output is called repeatability.

The practical curve which decided by the input of burden and the according sensor output, will deviated from the curve decided by output of sensor when imposed no pressure and rated output. The ratio of this deviation to normal output is called nonlineability.

Classification and Application of Elevator Load Cell电梯称重传感器的分类与应用 1. Load cells installed at the elevator headMounted the load cell at the elevator head board is a universal weighing method, which installs the load cell in the middle of two rope heads and detects two weight changes in the car. Pressure changes to carry out weighing measurements. This installation is characterized by strong applica...

What kind of load cells can be used in truck scale?Normally the truck scale use load cell of Column type and double ended shearbeam. Our double ended shearbeam load cell-693B,612B, 653B, are widely used in truck scale.Our Column load cell 689C, is interchangeable with HBM C16, it is one of our best selling item for truck scale!

To make high precision jewellery balance or electronic balance.normally use single point load cell, Creep of load cell is most important! The software of jewellery balance is also important. If have excellent software, you can use creep precision of 0.02% to make scale of 300g/0.01g. if not, you need to use a load cell of creep precision 0.01% or even 0.005% to make 300g/0.01g scale, or 600g/0.01...

OIML C3 standard means 3000divisions !The load cell can be used to make weighing scale of 3000divisions without special software. Creep is a very important function for a load cell. OIML C3 require the loadcell have a creep precision not less than 0.03%. normally the load cell manufactory will make OIML C3 load cell with a precision of 0.023%! Some quality factory can make the creep precision to...

What is creep of a load cell?The creep of a load cell means: when load cell is in stable environment( for example, temperature, humidity) and other changeable aspects keep no change (for example: estable force system, load and other aspects),when load cell is loaded quickly a nominal load and unload the nominal load, within a certain time, the output of load cell changes with time. the normal cre...

our load cell for jewellery scale-651C have ROHS certificate, and CE certificateAll other load cells have CE Certificate

For jewellery balance / precision balancem, the creep precision is one of the most important standard. For normal C3 standard, the creep precision is only about 0.023%, for the high precision balance, it is normally not enough. we have precision of 0.02%,0.01% and 0.005%.The smaller the creep is, the load cell is better!

For jewellery balance/ electronic balance, you can chose our 651 series (651C,651,651E, 651D), for 600g-0.01g, it's better to use creep precision of 0.01%, for 300g-0.01g, can use our 300g 0.01% precision. If you have special requirement of super high quality, you can chose 0.005% precision.The precision means creep precision. because For high precision balance, creep is the most import.